mV transmitter
2261
- Load cell amplifier
- mV to current / voltage conversion
- Front-programmable / LED display
- Relative calibration of input span
- NPN / PNP input for external taring
- Supply for standard transducers
Advanced features
- A multifunction user interface consisting of three pushbuttons and a 3-digit LED display for programming.
Application
- The 2261 converts bipolar mV signals from transducers supplied directly by the device to standard current / voltage signals.
- The 2261 is suitable for load cell application as well as other applications such as tank filling and draining, weighing with a taring function, measurement of cable tensile force, level control, signal conversion / amplification etc.
Technical characteristics
- Front error LED.
- The analog input can be programmed for voltage in the range -40...100 mVDC.
- The digital signal can be selected as either NPN or PNP.
- Taring can either be by way of the digital input or from the front interface.
- The analog output can be programmed to current in the range 0...20 mA or voltage in the range 0...10 VDC.
- Transducer supply which can be programmed to 5...13 VDC from the front. It is up to the customer to ensure a max. load of 230 mA (e.g. 6 parallel 350 Ω load cells).
- Sense input (with transducer supply used) for compensation for cable resistance to the transducer.
- Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.
Scheda tecnica & manuali
Scheda tecnica
- 2261.pdf
- Ultima versione
Manuali
- 2261V104_UK.pdf
- 2261V103_UK.pdf
- 2261V102_UK.pdf
- 2261V101_UK.pdf
- Versione precedente
- Ultima versione
Documentazione supplementare
Dichiarazione UE di conformità
- 2261DoC_EU_102_UK.pdf
- 2261DoC_EU_101_UK.pdf
- 2261DoC_EU_100_UK.pdf
- Versione precedente
- Ultima versione
Configurazioni predefinite
- PR_default_configurations.pdf
- Ultima versione
Note di sicurezza
Note di sicurezza
- SN2200-1_107_2436.pdf
- SN2200-1_106_2340.pdf
- SN2200-1_105_2232.pdf
- SN2200-1_104_1937.pdf
- SN2200-1_103_1745.pdf
- SN2200-1_102_1613.pdf
- SN2200-1_100_1106.pdf
- Versione precedente
- Ultima versione
Approvazioni & certificati
Dichiarazione EAC
- EAC-Declaration.pdf
- Ultima versione
Metrology Pattern Approval (MPA), Russia
- MPA_Russia.pdf
- Ultima versione
Modulo di ordine
Environmental Conditions
| Operating temperature | -20°C to +60°C |
| Calibration temperature | 20...28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree | IP50 |
Mechanical specifications
| Dimensions (HxWxD) | 80.5 x 35.5 x 84.5 mm (D is without pins) |
| Weight approx. | 130 g |
Common specifications
Supply |
|
| Supply voltage | 19.2...28.8 VDC |
| Max. required power | 7.2 W |
| Internal power dissipation | 2.2 W |
Response time |
|
| Response time (programmable) | 0.06...999 s |
| Signal / noise ratio | Min. 60 dB |
| Updating time | 20 ms |
| Signal dynamics, input | 17 bit |
| Signal dynamics, output | 16 bit |
| Effect of supply voltage change | < ±0.002% of span / %V |
| Temperature coefficient | < ±0.01% of span / °C |
| Linearity error | < 0.1% of span |
| Auxiliary voltage: Transducer supply | 5...13 VDC |
| Load (max.) | 230 mA |
| EMC immunity influence | < ±0.5% of span |
Input specifications
Common input specifications |
|
| Max. offset | 70% of selec. max. value |
Voltage input |
|
| Measurement range | -40...100 mV |
| Min. measurement range (span) | 10 mV |
| Input resistance | > 10 MΩ |
| Overrange | 0...999% of selected measurement range |
| NPN, digital input | Pull up 24 VDC / 6.9 mA |
| PNP, digital input | Pull down 0 VDC / 6.9 mA |
| Trig level low, NPN/PNP | < 6 VDC |
| Trig level high, NPN/PNP | > 10.5 VDC |
| Pulse length | > 30 ms |
Output specifications
Current output |
|
| Signal range | 0...20 mA |
| Min. signal range | 5 mA |
| Load (@ current output) | ≤ 600 Ω |
| Load stability | ≤ 0.01% of span / 100 Ω |
| Current limit | < 23 mA |
| Voltage output through internal shunt | See manual for details |
| of span | = of the presently selected range |
Observed authority requirements
| EMC | 2014/30/EU |
| RoHS | 2011/65/EU |
| EAC | TR-CU 020/2011 |
Need support to select the right product for your application?
Our sales engineers are ready to help specify the right device to meet your needs.
Reach out by phone to get in touch with us straight away – or use the contact form or quick quote function to send your RFQ directly from the website. You’ll get a response within 24 hours on normal business days.
You can expect to get a confirmed delivery date via email within 2 days after we have received your order.
As soon as your package leaves our warehouse, you’ll receive tracking details via email. And if you have any questions along the way we’re just a phone call or email away.
 |
State-of-the-art manufacturing Our 8,500 sqm integrated and automated manufacturing campus in Denmark covers the entire value-chain from design and development to manufacturing. It allows us to design and optimize for testing and manufacturing thereby constantly driving quality up and costs down. |
 |
Dedicated Presale / Aftersales
|
 |
Product reliability |
 |
Product deployment
|
 |
Smart products
Check out our range of communication interfaces
|
