5225A
Data sheet & Manuals
Safety note
Safety note
- SN5000-3_103_1933.pdf
- SN5000-3_102_1613.pdf
- SN5000_101_1450.pdf
- Previous versions
- Latest version
Approvals & Certificates
EAC declaration
- EAC-Declaration.pdf
- Latest version
Metrology Pattern Approval (MPA), Russia
- MPA_Russia.pdf
- Latest version
Supplementary documentation
Environmental Conditions
| Operating temperature | -20°C to +60°C |
| Calibration temperature | 20...28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree | IP20 |
Mechanical specifications
| Dimensions (HxWxD) | 109 x 23.5 x 130 mm |
| Weight approx. | 190 g |
| DIN rail type | DIN 46277 |
| Wire size | 1 x 2.5 mm2 stranded wire |
| Screw terminal torque | 0.5 Nm |
Common specifications
Supply |
|
| Supply voltage | 19.2...28.8 VDC |
| Max. required power | 3.5 W |
| Internal power dissipation | 1.7 W |
Isolation voltage |
|
| PELV/SELV | IEC 61140 |
| Warm-up time | 30 s |
| Power-up delay | 0...999 s |
| Programming | Loop Link |
| Signal / noise ratio | Min. 60 dB |
| Response time, analog | < 60 ms + period |
| Response time, digital output | < 50 ms + period |
| Response time, concurrent f/I and f/f | < 80 ms + period |
| Signal dynamics, output | 16 bit |
| Effect of supply voltage change | < ±0.002% of span / %V |
| Auxiliary voltage: NAMUR supply | 8.3 VDC ±0.5 VDC / 8 mA |
| S0 supply | 17 VDC / 20 mA |
| NPN / PNP supply | 17 VDC / 20 mA |
| Special supply (programmable) | 5...17 VDC / 20 mA |
| Temperature coefficient | < ±0.01% of span / °C |
| Linearity error | < 0.1% of span |
| EMC immunity influence | < ±0.5% |
Input specifications
Common input specifications |
|
| Max. offset | 90% of selected max. frequency |
| Measurement range | 0...20 kHz |
| Min. measurement range | 0.001 Hz |
| Low cut-off frequency | 0.001 Hz |
| Max. frequency, with input filter ON | 50 Hz |
| Min. period time with input filter ON | 20 ms |
| Input types |
NAMUR acc. to DIN 19234
Tacho NPN / PNP TTL S0 acc. to DIN 43864 |
Output specifications
Common output specifications |
|
| Updating time |
40 ms for concurrent f/I and f/f
20 ms |
Current output |
|
| Signal range | 0...20 mA |
| Min. signal range | 5 mA |
| Load (@ current output) | ≤ 600 Ω |
| Load stability | ≤ 0.01% of span / 100 Ω |
| Current limit | < 23 mA |
Voltage output |
|
| Signal range | 0...10 VDC |
| Min. signal range | 250 mV |
| Load (@ voltage output) | ≥ 500 kΩ |
Relay output |
|
| Max. switching frequency | 20 Hz |
| Isolation, test / working | 3.75 kVAC / 250 VAC |
| Max. voltage | 250 VRMS |
| Max. current | 2 AAC |
| Max. AC power | 500 VA |
| Max. load at 24 VDC | 1 A |
| Other output types |
Active outputs (NPN / PNP)
f/f converter output Frequency generator |
| of span | = of the presently selected range |
Observed authority requirements
| EMC | 2014/30/EU |
| LVD | 2014/35/EU |
| RoHS | 2011/65/EU |
| EAC | TR-CU 020/2011 |
