2-wire programmable transmitter

Get a quote within 24 hours

Supply
Supply voltage	7.2...30 VDC
Max. required power	≤ 0.7 W/≤ 1.4 W (1 ch./2 ch.)
Power dissipation, per channel	0.17...0.7 W
Isolation voltage
Isolation voltage, test / working	1.5 kVAC / 50 VAC
Response time
Response time (programmable)	1...60 s
Voltage drop	7.2 VDC
Warm-up time	5 min.
Programming	Loop Link
Signal / noise ratio	Min. 60 dB
Accuracy	Better than 0.05% of selected range
EEprom error check	< 3.5 s
Signal dynamics, input	20 bit
Signal dynamics, output	16 bit
Effect of supply voltage change	< 0.005% of span / VDC
EMC immunity influence	< ±0.5% of span
Extended EMC immunity: NAMUR NE21, A criterion, burst	< ±1% of span

Common input specifications
Max. offset	50% of selected max. value
RTD input
RTD type	Pt100, Ni100, lin. R
Cable resistance per wire	5 Ω (max.)
Sensor current	Nom. 0.2 mA
Effect of sensor cable resistance (3-/4-wire)	< 0.002 Ω / Ω
Sensor error detection	Yes
TC input
Thermocouple type	B, E, J, K, L, N, R, S, T, U, W3, W5, LR
Cold junction compensation (CJC)	< ±1.0°C
Sensor error detection	Yes
Sensor error current: When detecting / else	Nom. 33 μA / 0 μA
Linear resistance input
Linear resistance min....max.	0 Ω...5000 Ω
Voltage input
Measurement range	-12...800 mV
Min. measurement range (span)	5 mV
Input resistance	10 MΩ

Current output
Signal range	4…20 mA
Min. signal range	16 mA
Load (@ current output)	≤ (Vsupply - 7.2) / 0.023 [Ω]
Load stability	≤ 0.01% of span / 100 Ω
Sensor error indication	Programmable 3.5…23 mA
NAMUR NE43 Upscale/Downscale	23 mA / 3.5 mA
Common output specifications
Updating time	440 ms
of span	= of the presently selected range