5725
Data sheet & Manuals
Data sheet
- 5725.pdf
- Latest version
Manuals
- 5725V104_UK.pdf
- 5725V103_UK.pdf
- 5725V102_UK.pdf
- 5725V101_UK.pdf
- 5725V100_UK.pdf
- Previous versions
- Latest version
Manuals in Russian
- 5725V104_RU.pdf
- 5725V103_RU.pdf
- 5725V102_RU.pdf
- 5725V100_RU.pdf
- Previous versions
- Latest version
Supplementary documentation
EU Declaration of Conformity
- 5725DoC_EU_103_UK.pdf
- 5725DoC_EU_102_UK.pdf
- 5725DoC_EU_101_UK.pdf
- 5725DoC_EU_100_UK.pdf
- Previous versions
- Latest version
UKCA Declaration of Conformity
- 5725DoC_UKCA_100_UK.pdf
- Latest version
PR default configurations
- PR_default_configurations.pdf
- Latest version
Safety note
Safety note
- SN5500_5700_107_2418.pdf
- SN5500_5700_106_2208.pdf
- SN5500_5700_105_2050.pdf
- SN5500_5700_104_1613.pdf
- SN5500_5700_103_1304.pdf
- Previous versions
- Latest version
Approvals & Certificates
UL certificate
- 5714-15-25_UL.pdf
- Latest version
DNV EU-RO marine certificate
- DNV_EU_RO_4114_4116_4131_5714_5715_5725.pdf
- Latest version
EAC declaration
- EAC-Declaration.pdf
- Latest version
EAC LVD declaration
- EAC_LVD-Declaration.pdf
- Latest version
Metrology Pattern Approval (MPA), Russia
- MPA_Russia.pdf
- Latest version
Environmental Conditions
| Operating temperature | -20°C to +60°C |
| Storage temperature | -40°C to +85°C |
| Calibration temperature | 20...28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree | IP20 |
| Protection degree (mounted in panel) | IP65 / Type 4X |
| Installation in | Pollution degree 2 & meas. / overvoltage cat. II |
Mechanical specifications
| Dimensions (HxWxD) | 48 x 96 x 120 mm |
| Cut out dimensions | 44.5 x 91.5 mm |
| Weight approx. | 230 g |
| Wire size, pin 11-12 & 41-44, max. | 1 x 1.5 mm2/ AWG 30...16 stranded wire |
| Wire size, others, max. | 1 x 2.5 mm2/ AWG 30...12 stranded wire |
| Terminal connection | Spring-cage |
| Vibration | IEC 60068-2-6 |
| 2...13.2 Hz | ±1 mm |
| 13.2...100 Hz | ±0.7 g |
Common specifications
Supply |
|
| Supply voltage, universal | 21.6...253 VAC, 50...60 Hz or 19.2...300 VDC |
| Max. required power |
< 2.8 W (5725A)
< 3.6 W (5725D) |
Isolation voltage |
|
| Isolation voltage, test / working | 2.3 kVAC / 250 VAC |
Response time |
|
| Response time (0...90%, 100...10%) | < 1 period + 100 ms |
| Signal / noise ratio | > 60 dB |
| Accuracy | Better than 0.05% of selected range |
| EMC immunity influence | < ±0.5% of span |
| Extended EMC immunity: NAMUR NE21, A criterion, burst | < ±1% of span |
Input specifications
| Frequency range, f/I conversion function | 0.001 Hz to 50 kHz |
| Low cut-off frequency | 0.0009 Hz (default value) |
| Max. frequency, with input filter ON | 50 Hz |
| Time range, period time function | 999.9 s to 20 μs |
| Low cut off period time (time-out) | 1111 s |
| Min. period time with input filter ON | 20 ms |
| Input types |
NAMUR acc. to EN 60947-5-6
Tacho NPN / PNP TTL S0 acc. to DIN 43864 Special voltage Special current |
Output specifications
Display |
|
| Display readout | -1999...9999 (4 digits) |
| Decimal point | Programmable |
| Digit height | 13.8 mm |
| Display updating. | 2.2 times / s |
| Display response time, programmable | 0.0...60.0 s |
| Input outside input range is indicated by | Explanatory text |
Current output |
|
| Programmable signal ranges | 0...20/4...20/20...0/20...4 mA |
| Load (@ current output) | ≤ 800 Ω |
| Load stability | ≤ 0.01% of span / 100 Ω |
| Current limit | ≤ 28 mA |
| Sensor error indication | 0 / 3.5 / 23 mA / none |
| Output limitation, on 4...20 and 20...4 mA signals | 3.8...20.5 mA |
| Output limitation, on 0...20 and 20...0 mA signals | 0...20.5 mA |
Relay output |
|
| Relay functions | Setpoint |
| Hysteresis, in % / display counts | 0...100% / 0...9999 |
| ON and OFF delay | 0...3600 s |
| Power On delay | 0...60 s |
| Sensor error reaction | Break / Make / Hold |
| Max. voltage | 250 VAC / VDC |
| Max. current | 2 A |
| Max. AC power | 500 VA |
| Max. DC current, resistive load > 30 VDC | See manual for details |
Observed authority requirements
| EMC | 2014/30/EU & UK SI 2016/1091 |
| LVD | 2014/35/EU & UK SI 2016/1101 |
| RoHS | 2011/65/EU & UK SI 2012/3032 |
| EAC | TR-CU 020/2011 |
| EAC LVD | TR-CU 004/2011 |
Approvals
| c UL us, UL 508 | E248256 |
| EU RO MR Type Approval | MRA000000Z |
