Solenoid / alarm driver
9203B
- Universal Ex driver for solenoids, acoustic alarms and LEDs
- Extended self-diagnostics
- 1 or 2 channels
- Can be supplied separately or installed on power rail, PR 9400
- SIL 2-certified via Full Assessment
Advanced features
- Universal I.S. driver for the control of solenoids etc. with various I.S. data by way of three built-in I.S. barriers.
- Two hardware versions make it possible to choose either Low (35 mA) or High (60 mA) current output.
- Configuration and monitoring by way of detachable display front (PR 4500).
- Selection of direct or inverted function for each channel via PR 4500 and the possibility of reducing the output current to the hazardous area to suit the application.
- Optional monitoring of the output current to the hazardous area by way of PR 4500.
- Optional redundant supply via power rail and/or separate supply.
Application
- 9203B can be mounted in the safe area or in zone 2 / Class 1, Division 2 and transmit signals to zone 0, 1, 2 and zone 20, 21, 22 including M1 mining / Class I/II/III, Div. 1, Gr. A-G.
- Driver for the control of ON / OFF solenoids, acoustic alarms and LEDs mounted in safe or hazardous area.
- The 9203B is controlled by an NPN/PNP signal or a switch signal.
- Monitoring of internal error events via the individual status relay and/or a collective electronic signal via the power rail.
- The 9203B has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508.
- Suitable for the use in systems up to Performance Level “d” according to ISO-13849.
Technical characteristics
- 1 green and 2 yellow/red front LEDs indicate operation status and malfunction.
- 2.6 kVAC galvanic isolation between input, output and supply.
Mounting
- The devices can be mounted vertically or horizontally without distance between neighbouring units.
Datablad & Manualer
Datablad
- 9203B.pdf
- Senaste versionen
Manualer
- 9203V003_112_EN.pdf
- 9203V003_111_EN.pdf
- 9203V003_110_UK.pdf
- 9203V003_109_UK.pdf
- 9203V003_108_UK.pdf
- 9203BV003_107_UK.pdf
- 9203BV003_106_UK.pdf
- 9203BV003_105_UK.pdf
- 9203BV002_104_UK.pdf
- 9203BV002_103_UK.pdf
- 9203BV002_102_UK.pdf
- 9203BV001_101_UK.pdf
- 9203BV001_100_UK.pdf
- 9203AV002_101_UK.pdf
- 9203AV002_100_UK.pdf
- Tidigare versioner
- Senaste versionen
Manualer på ryska
- 9203V003_112_RU.pdf
- 9203V003_111_RU.pdf
- 9203V003_110_RU.pdf
- 9203V003_109_RU.pdf
- 9203V003_108_RU.pdf
- 9203BV003_107_RU.pdf
- 9203BV003_106_RU.pdf
- 9203BV003_105_RU.pdf
- 9203BV002_104_RU.pdf
- 9203BV002_103_RU.pdf
- 9203BV002_102_RU.pdf
- 9203BV001_101_RU.pdf
- 9203AV002_101_RU.pdf
- Tidigare versioner
- Senaste versionen
Manualer på portugisiska (Brasilien)
- 9203V003_112_PT_BR.pdf
- 9203V003_111_PT_BR.pdf
- 9203V003_110_BR.pdf
- 9203V003_109_BR.pdf
- 9203V003_108_BR.pdf
- 9203BV003_107_BR.pdf
- 9203BV003_106_BR.pdf
- 9203BV003_105_BR.pdf
- 9203BV002_104_BR.pdf
- 9203BV002_103_BR.pdf
- 9203AV002_101_BR.pdf
- Tidigare versioner
- Senaste versionen
Manualer på koreanska
- 9203V003_112_KR.pdf
- 9203V003_111_KR.pdf
- 9203V003_110_KR.pdf
- Tidigare versioner
- Senaste versionen
Safety manual (SIL)
- 9203_Safety_Manual_V9R0.pdf
- Senaste versionen
Godkännanden och certifikat
ATEX-certifikat
- 9203B_07ATEX0147X_issue6 .pdf
- 9203B_07ATEX0147X_issue5.pdf
- 9203B_07ATEX0147X_issue4.pdf
- 9203B_07ATEX0147X_issue3.pdf
- 9203B_07ATEX0147X_issue2.pdf
- 9203B_07ATEX0147X_issue1.pdf
- Tidigare versioner
- Senaste versionen
IECEx-certifikat
- 9203BIEC_090001X_issue4.pdf
- 9203BIEC_090001X_issue3.pdf
- 9203BIEC_090001X_issue2.pdf
- 9203BIEC_090001X_issue1.pdf
- 9203BIEC_090001X_issue0.pdf
- Tidigare versioner
- Senaste versionen
UKEX-certifikat
- 9203B_23UKEX0106X_issue0.pdf
- 9203B_21UKEX0181X_issue0.pdf
- Tidigare versioner
- Senaste versionen
CCC certifikat
- 9203_CCC_2023_04.pdf
- 9203_CCC_2020_11.pdf
- Tidigare versioner
- Senaste versionen
FM-certifikat
- 9203_FM19US0057X_FM19CA0030X.pdf
- Senaste versionen
INMETRO-certifikat
- 9203_INMETRO_230008X_issue0.pdf
- 9203_INMETRO_160006X_issue1.pdf
- 9203_INMETRO_160006X_issue0.pdf
- Tidigare versioner
- Senaste versionen
KCs-certifikat
- 9203B_KCs_21_AV4BO_0182_0183.pdf
- Senaste versionen
SIL-certifikat
- 9203_002_SIL.pdf
- Senaste versionen
UL-certifikat
DNV-certifikat
- DNV_9xxx_4510_4511.pdf
- Senaste versionen
ClassNK-certifikat
- ClassNK-TA24034M_91xx_92xx_94xx.pdf
- Senaste versionen
EAC-försäkran
- EAC_EMC_declaration_Ex_3000_5000_6000_9000.pdf
- Senaste versionen
EAC Ex-certifikat
- EAC_Ex.pdf
- Senaste versionen
Metrology Pattern Approval (MPA), Russia
- MPA_Russia.pdf
- Senaste versionen
Kompletterande dokumentation
EU försäkran om överensstämmelse
- 9203DoC_EU_103_UK.pdf
- 9203DoC_EU_102_UK.pdf
- 9203DoC_EU_101_UK.pdf
- 9203DoC_EU_100_UK.pdf
- Tidigare versioner
- Senaste versionen
UKCA försäkran om överensstämmelse
- 9203DoC_UKCA_100.pdf
- Senaste versionen
Modbus konfigurationsmanual
- 9203_MCM_101.pdf
- 9203_MCM_100.pdf
- Tidigare versioner
- Senaste versionen
Assessment rapport
- AssessmentReport_PR_2312098_V1R0_Series_9000.pdf
- Senaste versionen
FMEDA-rapport
- PR_060319_R023_FMEDA_9203_V3R3.pdf
- Senaste versionen
EMC-data
- 9000_EMC_data.pdf
- Senaste versionen
PR-standardkonfigurationer
- PR_default_configurations.pdf
- Senaste versionen
Säkerhetsanvisningar
Säkerhetsanvisningar
- SN9203_112_2425.pdf
- SN9203_111_2306.pdf
- SN9203_110_2049.pdf
- SN9203_109_2007.pdf
- SN9203_108_1914.pdf
- SN9203_107_1819.pdf
- SN9203_106_1613.pdf
- SN9000_105_1503.pdf
- Tidigare versioner
- Senaste versionen
Beställningsformulär
Environmental Conditions
| Operating temperature | -20°C to +60°C |
| Storage temperature | -20°C to +85°C |
| Calibration temperature | 20...28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree | IP20 |
| Installation in | Pollution degree 2 & meas. / overvoltage cat. II |
Mechanical specifications
| Dimensions (HxWxD) | 109 x 23.5 x 104 mm |
| Dimensions (HxWxD) w/ PR 4500 | 109 x 23.5 x 131 mm |
| Weight approx. | 170 g |
| DIN rail type | DIN EN 60715/35 mm |
| Wire size | 0.13...2.08 mm2 AWG 26...14 stranded wire |
| Screw terminal torque | 0.5 Nm |
| Vibration | IEC 60068-2-6 |
| 2...13.2 Hz | ±1 mm |
| 13.2...100 Hz | ±0.7 g |
Common specifications
Supply |
|
| Supply voltage | 19.2...31.2 VDC |
| Fuse | 1.25 A SB / 250 VAC |
| Max. required power |
≤ 1.9 W / ≤ 3.1 W (1 / 2 ch.) - low current
≤ 2.5 W (1 ch.) - high current |
| Max. power dissipation, 1 / 2 ch. | ≤ 1.1 W / ≤ 2.0 W (1 / 2 ch.) - low current |
| Max. power dissipation | ≤ 1.7 W (1 ch.) - high current |
Isolation voltage |
|
| Test /working: Input to any | 2.6 kVAC / 300 VAC reinforced isolation |
| Output 1 to output 2 | 1.5 kVAC / 150 VAC reinforced isolation |
| Status relay to supply | 1.5 kVAC / 150 VAC reinforced isolation |
| Programming | PR 4500 communication interfaces |
| EMC immunity influence | < ±0.5% of span |
| Extended EMC immunity: NAMUR NE21, A criterion, burst | < ±1% of span |
Input specifications
NPN and mechanical switch |
|
| Trig level LOW | ≤ 2.0 VDC |
| Trig level HIGH | ≥ 4.0 VDC |
| Max. external voltage | 28 VDC |
| Input impedance | 3.5 kΩ |
PNP |
|
| Trig level LOW | ≤ 8.0 VDC |
| Trig level HIGH | ≥ 10.0 VDC |
| Max. external voltage | 28 VDC |
| Input impedance | 3.5 kΩ |
Output specifications
Status relay |
|
| Max. voltage | 125 VAC / 110 VDC |
| Max. current | 0.5 AAC / 0.3 ADC |
| Max. AC power | 62.5 VA / 32 W |
| Output ripple | < 40 mVRMS |
Observed authority requirements
| EMC | 2014/30/EU & UK SI 2016/1091 |
| LVD | 2014/35/EU & UK SI 2016/1101 |
| ATEX | 2014/34/EU & UK SI 2016/1107 |
| RoHS | 2011/65/EU & UK SI 2012/3032 |
| EAC | TR-CU 020/2011 |
| EAC Ex | TR-CU 012/2011 |
| EAC LVD | TR-CU 004/2011 |
Approvals
| ATEX | KEMA 07ATEX0147 X |
| IECEx | KEM 09.0001X |
| UKEX |
DEKRA 21UKEX0181X
DEKRA 23UKEX0106X |
| c FM us | FM19US0057X / FM19CA0030X |
| INMETRO | DEKRA 23.0008X |
| c UL us, UL 61010-1 | E314307 |
| c UL us, UL 913 | E233311 (only 9203xxxx-U9) |
| CCC | 2020322304003423 |
| KCs | 21_AV4BO_0182X / 21_AV4BO_0183X (only 9203Bxxx-KCs) |
| EAC Ex | EAEU KZ 7500361.01.01.08756 |
| DNV Marine | TAA00000JD |
| ClassNK | TA24034M |
| SIL | SIL 2 certified & fully assessed acc. to IEC 61508 |
Need support to select the right product for your application?
Our sales engineers are ready to help specify the right device to meet your needs.
Reach out by phone to get in touch with us straight away – or use the contact form or quick quote function to send your RFQ directly from the website. You’ll get a response within 24 hours on normal business days.
You can expect to get a confirmed delivery date via email within 2 days after we have received your order.
As soon as your package leaves our warehouse, you’ll receive tracking details via email. And if you have any questions along the way we’re just a phone call or email away.
 |
State-of-the-art manufacturing Our 8,500 sqm integrated and automated manufacturing campus in Denmark covers the entire value-chain from design and development to manufacturing. It allows us to design and optimize for testing and manufacturing thereby constantly driving quality up and costs down. |
 |
Dedicated Presale / Aftersales
|
 |
Product reliability |
 |
Product deployment
|
 |
Smart products
Check out our range of communication interfaces
|
