HART transparent repeater
9106A
- 24 VDC supply via power rail or connectors
- Active and passive mA input
- Active or passive output via the same two terminals
- Splitter function - 1 in and 2 out
- SIL2 / SIL3 Full Assessment and certified acc. to IEC 61508
Application
- 9106A is a 1- or 2-channel isolated 1:1 repeater.
- The device supplies 2-wire SMART transmitters and can also be used for 2-wire SMART current sources. HART & BRAIN protocols are supported and are transferred bi-directionally.
- 9106A can be mounted in the safe area or in zone 2 / Class I, Division 2, Groups A, B, C, D.
- For duplication/migration purposes, the outputs can be sent to two different DCS/PLC/HMI or any monitoring system.
- In safety applications (SIL loops), the 9106AxBx can be used as a splitter with the following output configuration:
• When using 9106AxBx in a SIL2 safety function, channel 1 is used for the safety loop. Channel 2 can be used for any non-safety device.
• For higher safety purposes (SIL 3), 9106AxBx can be used as a splitter for SIL 3 loops. Channel 1 and 2 are then connected to the same safety PLC, where channel 2 is used as a redundant diagnostic channel (for more information, consult the FMEDA Report and the Safety Manual).
Advanced features
- The detachable displays in the PR 4500 series and the green and red front LEDs indicate operation status for each channel.
- Monitoring of error events and cable breakage on input via the individual status relay and/or a collective electronic signal via the power rail.
- Suitable for the use in systems up to Performance Level “d” according to ISO-13849.
Technical characteristics
- High galvanic isolation of 2.6 kVAC.
- Fast response time <5 ms
- High accuracy better than 0.1%.
- 2-wire transmitter supply >16 V.
Mounting
- The devices can be mounted vertically or horizontally without distance between neighbouring units.
Data sheet & Manuals
Data sheet
- 9106A.pdf
- Latest version
Manuals
- 9106V002_111_UK.pdf
- 9106V002_110_UK.pdf
- 9106V002_109_UK.pdf
- 9106V002_108_UK.pdf
- 9106V002_107_UK.pdf
- 9106V002_106_UK.pdf
- 9106BV002_105_UK.pdf
- 9106BV002_104_UK.pdf
- 9106BV002_103_UK.pdf
- 9106BV002_102_UK.pdf
- 9106BV002_101_UK.pdf
- 9106BV001_100_UK.pdf
- 9106AV002_102_UK.pdf
- 9106AV002_101_UK.pdf
- 9106AV002_100_UK.pdf
- Previous versions
- Latest version
Manuals in Russian
- 9106V002_111_RU.pdf
- 9106V002_110_RU.pdf
- 9106V002_109_RU.pdf
- 9106V002_108_RU.pdf
- 9106V002_107_RU.pdf
- 9106V002_106_RU.pdf
- 9106BV002_105_RU.pdf
- 9106BV002_104_RU.pdf
- 9106BV002_103_RU.pdf
- 9106BV002_102_RU.pdf
- Previous versions
- Latest version
Manuals in Portuguese (Brazil)
- 9106V002_111_BR.pdf
- 9106V002_110_BR.pdf
- 9106V002_109_BR.pdf
- 9106V002_108_BR.pdf
- 9106V002_107_BR.pdf
- 9106V002_106_BR.pdf
- 9106BV002_105_BR.pdf
- 9106BV002_104_BR.pdf
- 9106BV002_103_BR.pdf
- 9106BV002_102_BR.pdf
- Previous versions
- Latest version
Manuals in Korean
- 9106V002_111_KR.pdf
- 9106V002_110_KR.pdf
- 9106V002_109_KR.pdf
- 9106V002_108_KR.pdf
- Previous versions
- Latest version
Safety manual (SIL)
- 9106_Safety_Manual_V2R0.pdf
- Latest version
Approvals & Certificates
ATEX certificate
- 9106A_11ATEX0244X_issue4.pdf
- 9106A_0014ATEX0101X_issue2.pdf
- 9106A_0014ATEX0101X_issue1.pdf
- Previous versions
- Latest version
IECEx certificate
- 9106IEC_110084X_issue3.pdf
- Latest version
UKEX certificate
- 9106A_21UKEX0171X_issue0.pdf
- Latest version
FM certificate
- 9106_9107_FM16US0465X_FM16CA0213X.pdf
- Latest version
INMETRO certificate
- 9106_INMETRO_230003X_issue0.pdf
- Latest version
UL certificate
CCC certificate
- 9106_CCC_2023_04.pdf
- 9106_CCC_2020_11.pdf
- Previous versions
- Latest version
KCs certificate
- 9106A_KCs_21_AV4BO_0169X.pdf
- Latest version
DNV marine certificate
- DNV_9xxx_4510_4511.pdf
- 9000_DoC_DNV.pdf
- Previous versions
- Latest version
ClassNK certificate
- ClassNK-TA24034M_91xx_92xx_94xx.pdf
- Latest version
SIL certificate
- 9106_002_SIL.pdf
- Latest version
EAC declaration
- EAC_EMC_declaration_Ex_3000_5000_6000_9000.pdf
- Latest version
EAC LVD declaration
- EAC_LVD-Declaration.pdf
- Latest version
EAC Ex certificate
- EAC_Ex.pdf
- Latest version
Metrology Pattern Approval (MPA), Russia
- MPA_Russia.pdf
- Latest version
Supplementary documentation
EU Declaration of Conformity
- 9106DoC_EU_104_UK.pdf
- 9106DoC_EU_103_UK.pdf
- 9106DoC_EU_102_UK.pdf
- 9106DoC_EU_101_UK.pdf
- 9106DoC_EU_100_UK.pdf
- Previous versions
- Latest version
UKCA Declaration of Conformity
- 9106DoC_UKCA_100.pdf
- Latest version
Modbus configuration manual
- 9106_MCM_102.pdf
- 9106_MCM_101.pdf
- 9106_MCM_100.pdf
- Previous versions
- Latest version
Assessment
- AssessmentReport_PR_2312098_V1R0_Series_9000.pdf
- Latest version
FMEDA report
- PR_9106_9107_060319_R025_FMEDA_V2R1.pdf
- Latest version
ISO 13849 declaration
- 9106_ISO_13849_declaration.pdf
- Latest version
PR default configurations
- PR_default_configurations.pdf
- Latest version
Safety note
Safety note
EMC data
Order form
Environmental Conditions
Operating temperature | -20°C to +60°C |
Storage temperature | -20°C to +85°C |
Calibration temperature | 20...28°C |
Relative humidity | < 95% RH (non-cond.) |
Protection degree | IP20 |
Installation in | Pollution degree 2 & meas. / overvoltage cat. II |
Mechanical specifications
Dimensions (HxWxD) | 109 x 23.5 x 104 mm |
Dimensions (HxWxD) w/ PR 4500 | 109 x 23.5 x 131 mm |
Weight approx. | 250 g |
DIN rail type | DIN EN 60715/35 mm |
Wire size | 0.13...2.08 mm2 AWG 26...14 stranded wire |
Screw terminal torque | 0.5 Nm |
Vibration | IEC 60068-2-6 |
2...13.2 Hz | ±1 mm |
13.2...100 Hz | ±0.7 g |
Common specifications
Supply |
|
Supply voltage | 19.2...31.2 VDC |
Fuse | 1.25 A SB / 250 VAC |
Max. required power | ≤ 1.1 W / ≤ 1.9 W (1 ch. / 2 ch.) |
Max. power dissipation, 1 / 2 ch. | ≤ 0.8 W / ≤ 1.2 W |
Isolation voltage |
|
Test /working: Input to any | 2.6 kVAC / 300 VAC reinforced isolation |
Analog output to supply | 2.6 kVAC / 300 VAC reinforced isolation |
Status relay to supply | 1.5 kVAC / 150 VAC reinforced isolation |
Response time |
|
Response time (0...90%, 100...10%) | < 5 ms |
Programming | PR 4500 communication interfaces |
Signal dynamics, input | Analog signal chain |
Signal dynamics, output | Analog signal chain |
SMART bi-directional communication frequency range | 0.5...7.5 kHz |
Signal / noise ratio | > 60 dB |
Accuracy | Better than 0.1% of sel. range |
mA, absolute accuracy | ≤ ±16 μA |
mA, temperature coefficient | ≤ ±1.6 μA / °C |
Effect of supply voltage change on output (nom. 24 VDC) | < ±10 μA |
EMC immunity influence | < ±0.5% of span |
Extended EMC immunity: NAMUR NE21, A criterion, burst | < ±1% of span |
Input specifications
Current input |
|
Measurement range | 3.5...23 mA |
2-wire transmitter supply 9106A1x | >16 V / 20 mA |
2-wire transmitter supply 9106A2x | >15 V / 20 mA |
Sensor error detection: Loop break 4...20 mA | < 1 mA |
Input voltage drop, supplied unit | < 4 V @ 23 mA |
Input voltage drop, non-supplied unit | < 6 V @ 23 mA |
Output specifications
Current output |
|
Signal range | 3.5...23 mA |
Load (@ current output) | ≤ 600 Ω |
Load stability | ≤ 0.01% of span / 100 Ω |
Current limit | ≤ 28 mA |
Passive 2-wire mA output |
|
Effect of external 2-wire supply voltage variation | < 0.005% of span / V |
Max. external 2-wire supply | 26 VDC |
Status relay |
|
Relay function | N.C. |
Programmable low setpoint | 0...29.9 mA |
Programmable high setpoint | 0...29.9 mA |
Hysteresis for setpoints | 0.1 mA |
Max. voltage | 125 VAC / 110 VDC |
Max. current | 0.5 AAC / 0.3 ADC |
Max. voltage - hazardous installation | 32 VDC / 32 VAC |
Max. current - hazardous installation | 1 ADC / 0.5 AAC |
of span | = normal measurement range 4...20 mA |
Observed authority requirements
EMC | 2014/30/EU & UK SI 2016/1091 |
LVD | 2014/35/EU & UK SI 2016/1101 |
ATEX | 2014/34/EU & UK SI 2016/1107 |
RoHS | 2011/65/EU & UK SI 2012/3032 |
EAC | TR-CU 020/2011 |
EAC LVD | TR-CU 004/2011 |
EAC Ex | TR-CU 012/2011 |
Approvals
ATEX | DEKRA 11ATEX0244 X |
IECEx | DEK 11.0084X |
UKEX | DEKRA 21UKEX0171X |
c FM us | FM16US0465X / FM16CA0213X |
INMETRO | DEKRA 23.0003X |
c UL us, UL 61010-1 | E314307 |
c UL us, UL 913 | E233311 (only 9106xxx-U9) |
CCC | 2020322309003231 |
KCs | 21_AV4BO_0169X (only 9106Axx-KCs) |
EAC Ex | RU C-DK.HA65.B.00355/19 |
DNV Marine | TAA00000JD |
ClassNK | TA24034M |
SIL | SIL 2 / SIL 3 certified & fully assessed acc. to IEC 61508 |
Need support to select the right product for your application?
Our sales engineers are ready to help specify the right device to meet your needs.
Reach out by phone to get in touch with us straight away – or use the contact form or quick quote function to send your RFQ directly from the website. You’ll get a response within 24 hours on normal business days.
You can expect to get a confirmed delivery date via email within 2 days after we have received your order.
As soon as your package leaves our warehouse, you’ll receive tracking details via email. And if you have any questions along the way we’re just a phone call or email away.
State-of-the-art manufacturing Our 8,500 sqm integrated and automated manufacturing campus in Denmark covers the entire value-chain from design and development to manufacturing. It allows us to design and optimize for testing and manufacturing thereby constantly driving quality up and costs down. |
Dedicated Presale / Aftersales
|
Product reliability |
Product deployment
|
Smart products
Check out our range of communication interfaces
|