Solenoid / alarm driver
9203A
- Universal driver for solenoids, acoustic alarms and LEDs
- Extended self-diagnostics
- 1 or 2 channels
- Can be supplied separately or installed on power rail, PR 9400
- SIL 2-certified via Full Assessment
Advanced features
- Universal driver for the control of solenoids etc.
- Two hardware versions make it possible to choose either Low (35 mA) or High (60 mA) current output.
- Configuration and monitoring by way of detachable display front (PR 4500).
- Selection of direct or inverted function for each channel via PR 45xx and the possibility of reducing the output current to suit the application.
- Optional monitoring of the output current by way of PR 4500.
- Optional redundant supply via power rail and/or separate supply.
Application
- The 9203A can be mounted in the safe area and in zone 2 / Class 1, Division 2, Group A, B, C, D.
- Control of ON / OFF solenoids, acoustic alarms and LEDs.
- The 9203A is controlled by an NPN/PNP signal or a switch signal.
- Monitoring of internal error events via the individual status relay and/or a collective electronic signal via the power rail.
- The 9203A has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508.
- Suitable for the use in systems up to Performance Level “d” according to ISO-13849.
Technical characteristics
- 1 green and 2 yellow/red front LEDs indicate operation status and malfunction.
- 2.6 kVAC galvanic isolation between input, output and supply.
Mounting
- The devices can be mounted vertically or horizontally without distance between neighbouring units.
Scheda tecnica & manuali
Scheda tecnica
- 9203A.pdf
- Ultima versione
Manuali
- 9203V003_112_EN.pdf
- 9203V003_111_EN.pdf
- 9203V003_110_UK.pdf
- 9203V003_109_UK.pdf
- 9203V003_108_UK.pdf
- 9203BV003_107_UK.pdf
- 9203BV003_106_UK.pdf
- 9203BV003_105_UK.pdf
- 9203BV002_104_UK.pdf
- 9203BV002_103_UK.pdf
- 9203BV002_102_UK.pdf
- 9203BV001_101_UK.pdf
- 9203BV001_100_UK.pdf
- 9203AV002_101_UK.pdf
- 9203AV002_100_UK.pdf
- Versione precedente
- Ultima versione
Manuali in russo
- 9203V003_112_RU.pdf
- 9203V003_111_RU.pdf
- 9203V003_110_RU.pdf
- 9203V003_109_RU.pdf
- 9203V003_108_RU.pdf
- 9203BV003_107_RU.pdf
- 9203BV003_106_RU.pdf
- 9203BV003_105_RU.pdf
- 9203BV002_104_RU.pdf
- 9203BV002_103_RU.pdf
- 9203BV002_102_RU.pdf
- 9203BV001_101_RU.pdf
- 9203AV002_101_RU.pdf
- Versione precedente
- Ultima versione
Manuali in portoghese ((Brasile)
- 9203V003_112_PT_BR.pdf
- 9203V003_111_PT_BR.pdf
- 9203V003_110_BR.pdf
- 9203V003_109_BR.pdf
- 9203V003_108_BR.pdf
- 9203BV003_107_BR.pdf
- 9203BV003_106_BR.pdf
- 9203BV003_105_BR.pdf
- 9203BV002_104_BR.pdf
- 9203BV002_103_BR.pdf
- 9203AV002_101_BR.pdf
- Versione precedente
- Ultima versione
Manuali in coreano
- 9203V003_112_KR.pdf
- 9203V003_111_KR.pdf
- 9203V003_110_KR.pdf
- Versione precedente
- Ultima versione
Safety manual (SIL)
- 9203_Safety_Manual_V9R0.pdf
- Ultima versione
Approvazioni & certificati
Certificato ATEX
- 9203A_07ATEX0147X_issue6.pdf
- 9203A_07ATEX0147X_issue5.pdf
- 9203A_0014ATEX0101X_issue1.pdf
- Versione precedente
- Ultima versione
Certificato IECEx
- 9203AIEC_090001X_issue4.pdf
- Ultima versione
Certificato UKEX
- 9203A_21UKEX0181X_issue0.pdf
- Ultima versione
Certificato CCC
- 9203_CCC_2023_04.pdf
- 9203_CCC_2020_11.pdf
- Versione precedente
- Ultima versione
Certificato FM
- 9203_FM19US0057X_FM19CA0030X.pdf
- Ultima versione
Certificato INMETRO
- 9203_INMETRO_230008X_issue0.pdf
- Ultima versione
Certificato KCs
- 9203A_KCs_21_AV4BO_0184.pdf
- Ultima versione
Certificato UL
Certificato marina DNV
- DNV_9xxx_4510_4511.pdf
- Ultima versione
Certificato ClassNK
- ClassNK-TA18527M_91xx_92xx_94xx.pdf
- Ultima versione
Certificato SIL
- 9203_002_SIL.pdf
- Ultima versione
Dichiarazione EAC
- EAC_EMC_declaration_Ex_3000_5000_6000_9000.pdf
- Ultima versione
Dichiarazione LVD EAC
- EAC_LVD-Declaration.pdf
- Ultima versione
Certificato EAC Ex
- EAC_Ex.pdf
- Ultima versione
Metrology Pattern Approval (MPA), Russia
- MPA_Russia.pdf
- Ultima versione
Documentazione supplementare
Dichiarazione UE di conformità
- 9203DoC_EU_103_UK.pdf
- 9203DoC_EU_102_UK.pdf
- 9203DoC_EU_101_UK.pdf
- 9203DoC_EU_100_UK.pdf
- Versione precedente
- Ultima versione
Dichiarazione UKCA di conformità
- 9203DoC_UKCA_100.pdf
- Ultima versione
Manuale di configurazione Modbus
- 9203_MCM_101.pdf
- 9203_MCM_100.pdf
- Versione precedente
- Ultima versione
Dati EMC
- 9000_EMC_data.pdf
- Ultima versione
Rapporto di valutazione
- AssessmentReport_PR_2312098_V1R0_Series_9000.pdf
- Ultima versione
Rapporto FMEDA
- PR_060319_R023_FMEDA_9203_V3R3.pdf
- Ultima versione
Configurazioni predefinite
- PR_default_configurations.pdf
- Ultima versione
Note di sicurezza
Note di sicurezza
- SN9203_112_2425.pdf
- SN9203_111_2306.pdf
- SN9203_110_2049.pdf
- SN9203_109_2007.pdf
- SN9203_108_1914.pdf
- SN9203_107_1819.pdf
- SN9203_106_1613.pdf
- SN9000_105_1503.pdf
- Versione precedente
- Ultima versione
Modulo di ordine
Environmental Conditions
| Operating temperature | -20°C to +60°C |
| Storage temperature | -20°C to +85°C |
| Calibration temperature | 20...28°C |
| Relative humidity | < 95% RH (non-cond.) |
| Protection degree | IP20 |
| Installation in | Pollution degree 2 & meas. / overvoltage cat. II |
Mechanical specifications
| Dimensions (HxWxD) | 109 x 23.5 x 104 mm |
| Dimensions (HxWxD) w/ PR 4500 | 109 x 23.5 x 131 mm |
| Weight approx. | 170 g |
| Weight incl. 4501 / 451x (approx.) | 185 g / 200 g |
| DIN rail type | DIN EN 60715/35 mm |
| Wire size | 0.13...2.08 mm2 AWG 26...14 stranded wire |
| Screw terminal torque | 0.5 Nm |
| Vibration | IEC 60068-2-6 |
| 2...13.2 Hz | ±1 mm |
| 13.2...100 Hz | ±0.7 g |
Common specifications
Supply |
|
| Supply voltage | 19.2...31.2 VDC |
| Fuse | 1.25 A SB / 250 VAC |
| Max. required power |
≤ 1.9 W / ≤ 3.1 W (1 / 2 ch.) - low current
≤ 2.5 W (1 ch.) - high current |
| Max. power dissipation, 1 / 2 ch. | ≤ 1.1 W / ≤ 2.0 W (1 / 2 ch.) - low current |
| Max. power dissipation | ≤ 1.7 W (1 ch.) - high current |
Isolation voltage |
|
| Test /working: Input to any | 2.6 kVAC / 300 VAC reinforced isolation |
| Output 1 to output 2 | 1.5 kVAC / 150 VAC reinforced isolation |
| Status relay to supply | 1.5 kVAC / 150 VAC reinforced isolation |
| Programming | PR 4500 communication interfaces |
| EMC immunity influence | < ±0.5% of span |
| Extended EMC immunity: NAMUR NE21, A criterion, burst | < ±1% of span |
Input specifications
NPN and mechanical switch |
|
| Trig level LOW | ≤ 2.0 VDC |
| Trig level HIGH | ≥ 4.0 VDC |
| Max. external voltage | 28 VDC |
| Input impedance | 3.5 kΩ |
PNP |
|
| Trig level LOW | ≤ 8.0 VDC |
| Trig level HIGH | ≥ 10.0 VDC |
| Max. external voltage | 28 VDC |
| Input impedance | 3.5 kΩ |
Output specifications
Status relay |
|
| Max. voltage | 125 VAC / 110 VDC |
| Max. current | 0.5 AAC / 0.3 ADC |
| Max. AC power | 62.5 VA / 32 W |
| Output ripple | < 40 mVRMS |
Observed authority requirements
| EMC | 2014/30/EU & UK SI 2016/1091 |
| LVD | 2014/35/EU & UK SI 2016/1101 |
| ATEX | 2014/34/EU & UK SI 2016/1107 |
| RoHS | 2011/65/EU & UK SI 2012/3032 |
| EAC | TR-CU 020/2011 |
| EAC Ex | TR-CU 012/2011 |
| EAC LVD | TR-CU 004/2011 |
Approvals
| ATEX | KEMA 07ATEX0147 X |
| IECEx | KEM 09.0001X |
| UKEX | DEKRA 21UKEX0181X |
| c FM us | FM19US0057X / FM19CA0030X |
| INMETRO | DEKRA 23.0008X |
| c UL us, UL 61010-1 | E314307 |
| CCC | 2020322304003423 |
| KCs | 21_AV4BO_0184X (only 9203Axxx-KCs) |
| c UL us, UL 913 | E233311 (only 9203xxxx-U9) |
| DNV Marine | TAA00000JD |
| ClassNK | TA24034M |
| EAC Ex | EAEU KZ 7500361.01.01.08756 |
| SIL | SIL 2 certified & fully assessed acc. to IEC 61508 |
Need support to select the right product for your application?
Our sales engineers are ready to help specify the right device to meet your needs.
Reach out by phone to get in touch with us straight away – or use the contact form or quick quote function to send your RFQ directly from the website. You’ll get a response within 24 hours on normal business days.
You can expect to get a confirmed delivery date via email within 2 days after we have received your order.
As soon as your package leaves our warehouse, you’ll receive tracking details via email. And if you have any questions along the way we’re just a phone call or email away.
 |
State-of-the-art manufacturing Our 8,500 sqm integrated and automated manufacturing campus in Denmark covers the entire value-chain from design and development to manufacturing. It allows us to design and optimize for testing and manufacturing thereby constantly driving quality up and costs down. |
 |
Dedicated Presale / Aftersales
|
 |
Product reliability |
 |
Product deployment
|
 |
Smart products
Check out our range of communication interfaces
|
